Technologies and production

Modern technologies, precise manufacturing, emphasis on quality.

At our plants in Senica and Nitra, we use modern technological lines for precision cutting, pressing, and further processing of flat steel and alluminum. We manage every step of production with an emphasis on quality, safety, and efficiency.

We continuously improve all solutions through automation, digitization, and innovation to achieve top-quality outputs and high flexibility.

Line filter

  • Press blanking line WEINGARTEN – L3

    Výrobky: Trapezoidal blanks and products
    Press blanking line WEINGARTEN | Senica
    MATERIAL SURFACEdry/ oiled
    KIND OF MATERIALHot rolled-pickled/ cold rolled / zinc coated
    TYPE OF MATERIALOceľHliník
    THICKNESS(mm)0,5 ‑ 3,00,5 ‑ 3,0
    WIDTH (mm)200 ‑ 1450
    TENSILE STRENGHT ‑ Rm (Mpa)0,5 ‑ 1,0 mm 290 ‑ 7001,0 ‑ 3,0 mm 290 ‑ 500
    YIELD POINT ‑ Re (Mpa)180 ‑ 700
    INSIDE Ø DIAMETER (mm)508 + 610
    OUTSIDE Ø DIAMETER(mm)max 1850
    WEIGHT OF COIL(t)5
    MIN. LENGHT OF FEED (mm)175
    FORCE (kN)500
    SLIDE STROKE ‑ FIXED (mm)350
    DISTANCE RAM-TABLE (mm)1250
    SLIDE ADJUSTMENT (mm)350
    TABLE SURFACE(mm)2440 x 1525
    NO. OF STROKES (s.P.M.)15 ‑ 35
    DISTANCE BETWEEN UPRIGHTS (width x height) (mm)840 x 1600
    BLANK PARAMETERS
    BLANK SIZE MAX (mm)1500 x 1650
    BLANK SIZE MIN (mm)245 x 175
    MAX. HEIGHTS OF STACK EXCL PALLET (mm)500
    MAX. HEIGHTS OF STACK INCL PALLET(mm)610
    MAX. WEIGHT OF STACK INCL PALLET (t)5
    LENGTH OF TOLERANCE - STRAIGHT / RACTANGULAR CUT
    Feed (mm)
    THICKNESS (mm)< 400> 400
    < 1,5+/- 0,25+/- 1,0
    > 1,5+/- 0,5+/- 1,0
    Lenght of tolerance / trapezoidal cut
    Feed (mm)
    THICKNESS (mm)< 400> 400
    < 1,5+/- 0,25+/- 1,0
    > 1,5+/- 0,5+/- 1,0
    Lenght of tolerance - straight cut
    Shaped cutting by tools
    CAN BE PRODUCED WITH THE TOOLS SUPPLIED BY CUSTOMERS OR MADE BY AMG.
    MAX. DIMENSION TOOLS (w x l x h ) (mm)2440 x 1525 x 1350
    MIN HEIGHT TOOLS (mm)1050
    MIN. / MAX. WORKING SPEED (spm)15 ‑ 35
    STRIP THICKNESS (mm)0,5 ‑ 3,0
    MAX. BLANK SIZE (mm)1500 x 2000
    MIN. BLANK SIZE (mm)245 x 175
    Possibility to consult other parameters individually.

  • Press blanking line – L5 FAGOR

    Výrobky: Trapezoidal blanks
    MATERIAL SURFACEdry / oiled
    KIND OF MATERIALHot rolled ‑ pickled / cold rolled / zinc coated
    TYPE OF MATERIALSteelAlluminium
    THICKNESS (mm)0,5 ‑ 3,50,5 ‑ 4,0
    WIDTH (mm)200 ‑ 2100
    YIELD POINTS ‑ Re (Mpa)900450
    INSIDE DIAMETER (mm)508 + 610
    OUTSIDE DIAMETER (mm)900 ‑ 2100
    COIL WEIGHT MAX.(t)29
    FEEDING LENGHT MIN. (mm)200
    FORCE (kN)8000
    SLIDE STROKE ‑ FIXED (mm)180
    DISTANCE RAM ‑ DISTANCE (mm)1200
    SLIDE ADJUSTMENT (mm)400
    TABLE SURFACE(WIDTH x DEPTH) (mm)4500 x 3000
    NO. OF STROKES (s.P.M.)10 ‑ 90
    DISTANCE BETWEEN UPRIGHTS (mm)4650 ‑ 2525
    BLANKS PARAMETERS
    MAX. BLANKS SIZE (mm)2100 x 4000
    MIN. BLANK SIZE (mm)200 x 200
    MAX. HEIGHT OF STACK EXCL PALLET (mm)600
    MAX. HEIGHT OF STACK INCL PALLET(mm)9
    MAX. WEIGHT OF STACK INCL PALLET (t)15
    Lenght of tolerance - straight / rectangular cut
    Feed (mm)
    THICKNESS(mm)< 400> 400
    < 1,5+/- 0,25+/- 1,0
    > 1,5+/- 0,5+/- 1,0
    Lenght of tolerance - trapezoidal cut
    Feed (mm)
    THICKNESS (mm)< 400> 400
    < 1,5+/- 0,20+/- 0,5
    > 1,5+/- 0,5+/- 1,0
    Lenght of tolerance - straight cut
    Shaped cutting by tools
    MIN / MAX. WORKING SPEED (cycles/min)15/90
    STRIP (STEEL) THICKNESS (mm)0,5 ‑ 3,0
    STRIP (ALUMMINIUM) THICKNESS (mm)0,5 ‑ 2,5
    MAX. BLANK SIZE (mm)2100 x 4000
    MIN. BLANK SIZE (mm)200 x 200

  • Press blanking line – L6 FAGOR

    Výrobky: Cuts and trapezoidal sheets
    MATERIAL SURFACEdry / oiled
    KIND OF MATERIALPickled steel, cold rolled, zinc coated (electrolytic, hot galvanized, phosphate), oiled, no-oiled, USIBOR for inner parts of hot stamping, and eventually outer blanks.
    TYPE OF MATERIALSteel / USIBOR
    THICKNESS(mm)0,5 ‑ 3,5
    WIDTH (mm)200 ‑ 2000
    YIELD POINT ‑ Re (Mpa)< 2 mm 1100 >2 mm 600
    INSIDE DIAMETER (mm)508 + 610
    OUTSIDE DIAMTER (mm)900 ‑ 2000
    MAX. WEIGHT OF COIL (t)29
    MIN. LENGHT OF FEEDING (mm)50
    FORCE (kN)12500
    SLIDE STROKE ‑ FIXED (mm)200
    DISTANCE RAM ‑ TABLE (mm)1460
    SLIDE ADJUSTMENT (mm)450
    TABLE SURFACE (WIDTH x DEPTH) (mm)4500 x 2500
    POČET ÚDEROV (s.P.M.)10 ‑ 66
    DISTANCE BETWEEN UPRIGHTS (WIDTH x HEIGHT) (mm)4640 ‑ 2600
    BLANKS PARAMETERS
    MAX. BLANKS SIZE(mm)2200 x 1200
    MIN. BLANKS SIZE (mm)300 x 80
    MAX. HEIGHT OF STACK EXCL. PALLET (mm)500
    MAX. HEIGHT OF STACK INCL. PALLET (mm)860
    MAX. HEIGHT OF STACK INCL. PALLET (t)8
    MIN/MAX WORKING SPEED (cycle/min)10 ‑ 66
    MAX. BLANK SIZE (mm)2200 x 1200
    MIN. BLANK SIZE (mm)200 x 200
    Length of tolerance - straight/rectangular cut
    Feed (mm)
    THICKNESS (mm)< 400> 400
    < 1,5+/- 0,25+/- 1,0
    > 1,5+/- 0,5+/- 1,0
    Length of tolerance - trapezoidal cut
    Feed (mm)
    THICKNESS (mm)< 400> 400
    < 1,5+/- 0,2+/- 0,5
    > 1,5+/- 0,5+/- 1,0
    Length of tolerance - straight cut
    Shaped cutting by tools

    Can by produced with the tools supplied by customers or made by AMG.

  • Press blanking line – L7 FAGOR

    Výrobky: Sheets and cuts
    L7 press blanking line Fagor | Senica
    MATERIAL SURFACEdry / oiled
    KIND OF MATERIALPickled steel, cold rolled, zinc coated (electrolytic, hot galvanized, phosphate), oiled, no-oiled, USIBOR for inner parts of hot stamping, and eventually outer blanks
    TYPE OF MATERIALSteel / USIBOR
    WIDTH (mm)200 ‑ 2000
    THICKNESS (mm)0,5 ‑ 3,5
    YIELD POINT ‑ RE (Mpa)<2 mm 1100 N/m² >2 mm 600 N/m²
    INSIDE DIAMETER (mm)508 ‑ 610
    OUTSIDE DIAMETER (mm)900 ‑ 2000
    COIL WEIGHT MAX (t)29
    MIN. LENGHT OF FEEDING (mm)50
    FORCE (kN)12500
    SLIDE STROKE ‑ FIXED (mm)200
    DISTANCE RAM ‑ TABLE (mm)1460
    SLIDE ADJUSTMENT (mm)450
    TABLE SURFACE (width x depth)4500 x 2500
    NO. OF STROKES (s.P.M.)10 ‑ 66
    DISTANCE BETWEEN UPRIGHTS (width x height) (mm) (mm)4640 – 2600
    Rozmery nástrihov
    MAX. BLANK SIZE (mm)2200 x 1200
    MIN. BLANK SIZE (mm)300 x 80
    MAX. HEIGHT OF STACK EXCL. PALLET (mm)500
    MAX. HEIGHT OF STACK INCL. PALLET (mm)860
    MAX. WEIGHT OF STACK INCL. PALLET (t)8
    MIN./MAX. WORKING SPEED (cycles / min)10 ‑ 66
    MAX. BLANK SIZE (mm)2200 x 1200
    MIN. BLANK SIZE (mm)200 x 200
    Length of tolerance – straight / rectangular cut
    Feed (mm)
    THICKNESS< 400> 400
    < 1.5+/- 0.25+/- 0.5
    > 1.5+/- 0.5+/- 1.0
    Length of tolerance – trapezoidal cut
    Feed (mm)
    THICKNESS< 400> 400
    < 1.5+/- 0.2+/- 0.5
    < 1.5+/- 0.5+/- 1.0
    Length of tolerance – straight cut
    MAX. ANGLE40°
    Shaped cutting by tools - Can be produced with the tools supplied by customers or made by AMG.
    Individuálne možnosť konzultácie iných parametrov.
    http://L7

  • L1 press blanking line FAGOR (Nitra)

    Výrobky: Sheets
    L1 press blanking line FAGOR | Nitra
    MATERIAL SURFACEdry / oiled
    KIND OF MATERIALHot rolled ‑ pickled / Cold rolled ‑ zinc coated, electrolytic, galvanized, phosphate
    TYPE OF MATERIALSteelAluminum
    THICKNESS0,5 ‑ 3,50,5 ‑ 4,0
    TENSILE STRENGTH ‑ RM (Mpa)< 2 mm 1145 N/m² > 2 mm 1000 N/m² 400 N/m²
    YIELD POINT ‑ RE (Mpa)< 2 mm 1000N/m² > 2 mm 600 N/m² 350 N/m²
    INSIDE DIAMETER (mm)508 ‑ 610
    OUTSIDE DIAMETER (mm)800 ‑ 2500
    COIL WEIGHT MAX (t)35
    FEEDING LENGTH MIN (mm)150
    FORCE (kN)8000
    SLIDE STROKE ‑ FIXED (mm)200
    DISTANCE RAM ‑ TABLE (mm)1250
    SLIDE ADJUSTMENT (mm)350450
    TABLE SURFACE (width x depth)5400 x 2500
    NO. OF STROKES (s.P.M.)15 ‑ 66
    Rozmery nástrihov
    MAX BLANK SIZE (mm)2150 x 4500
    MIN BLANK SIZE (mm)150 x 200
    MAX. HEIGHT OF STACK EXCL. PALLET (mm)500
    MAX. HEIGHT OF STACK INCL. PALLET (mm)860
    MAX. WEIGHT OF STACK INCL. PALLET (t)8
    TOLERANCEEN 10131/10143/10051
    MAX. ANGLE35°
    MAX. DIMENSION TOOLS (W x L x H) 5400 x 2500 x 1150
    MAX. WEIGHT TOOLS (t)36
    MAX. WEIGHT OF UPPER PAET TOOLS (t)25

You do not hesitate to contact us.

Contact us

Do you want to ask us something?

+421 (0) 34 651 61 43
--