Technologies and production

Modern technologies, precise manufacturing, emphasis on quality.

At our plants in Senica and Nitra, we use modern technological lines for precision cutting, pressing, and further processing of flat steel and alluminum. We manage every step of production with an emphasis on quality, safety, and efficiency.

We continuously improve all solutions through automation, digitization, and innovation to achieve top-quality outputs and high flexibility.

• Multiblanking line STAM – L1

  Collapse
  Výrobky: Sheets

  MATERIAL SURFACE	dry / oiled
  KIND OF MATERIAL	Hot rolled-pickled/cold rolled/zinc coated
  	ENTRY ‑ COIL		EXIT ‑ SHEETS		EXIT BLANKS
  	Min.	Max.	Min.	Max.	Min.	Max.
  THICKNESS (mm)	0,4	3	0,4	3	0,4	3
  WIDTH (mm)	MB 300mm Tabule 600mm	1600	600	1600 (1530 s orezom)	300	860
  LENGHT(mm)			600	6000	400	3000
  TENSILE STRENGHT- Rm (MPa)	200	760
  YIELD POINT ‑ Re (MPa)	150	450
  OUTSIDE DIAMETER (mm)	900	2000
  INSIDE DIAMETER (mm)	508 + 610
  WEIGHT OF COIL (t)		29
  WEIGHT OF BUNDLE (t)				5		5
  HEIGHT OF BUNDLE (mm)				400		400

  Width of tolerances

  THICKNESS (mm)	WIDTH (mm)
  	300 ‑ 500	500 ‑ 1000	1000 ‑ 1500
  < 0,8	+/- 0,15	+/- 0,30	+/- 0,50
  0,8 ‑ 1,5	+/- 0,20	+/- 0,30	+/- 0,50
  1,5 ‑ 2,0	+/- 0,25	+/- 0,30	+/- 0,50
  2,0 ‑ 3,0	+/- 0,30	+/- 0,40	+/- 0,50

  Lenght of tolerance

  BLANKS	NUMBER	TOLERANCES
  	1 blank	+/- 0,8
  	2 blanks	+/- 1,2
  	3 blanks	+/- 1,5
  	4 blanks	+/- 2,0

  SHEETS	LENGHT	TOLERANCES
  	600 ‑ 1000	+/- 0,5
  	1000 ‑ 3000	+/- 1,5
  	3000 ‑ 6000	+/- 3,0

• Slitting line STAMCO – L2

  Collapse
  Výrobky: Coils and strips

  MATERIAL SURFACE	dry / oiled
  KIND OF MATERIAL	Hot rolled ‑ pickled /cold rolled/ zinc coated
  	THICKNESS		ENTRY ‑ COIL		EXIT ‑ STRIPS
  	(mm)		Min.	Max.	Min.	Max.
  THICKNESS (mm)			0,4	3	0,4	3
  WIDTH (mm)			400	1630	30	1600
  TENSILE STRENGHT  ‑ Rm (Mpa)	0,4 - 1,0 1,0 - 3,0		290 290	1100 750
  YIELD POINT ‑ Re (Mpa)			180	700
  OUTSIDE DIAMETER (mm)			900	1900	900	1850 / 1820
  INSIDE DIAMETER (mm)			508 + 610		508 + 610
  WEIGHT OF COIL (t)				29		21
  WEIGHT OF STRIPS OS (t)						5
  WIDTH OF STRIPS (mm)						600

  Number of strips

  THICKNESS (mm)	Tensile Strenght ‑ Rm (Mpa)
  	470	750	900
  0,4	20	18	11
  0,5	20	18	11
  1,2	18	13	9
  1,5	15	12	7
  2,0	12	9	5
  2,5	10	7	3
  3,0	9	6	1

  Width of tolerance

  THICKNESS (mm)	WIDTH (mm)
  	150 ‑ 300	300 ‑ 600	600 ‑ 1600
  0,4 ‑ 1,5	+/- 0,10	+/- 0,10	+/- 0,15
  1,5 ‑ 3,0	+/- 0,15	+/- 0,15	+/- 0,15

  

• Press blanking line WEINGARTEN – L3

  Collapse
  Výrobky: Trapezoidal blanks and products

  Press blanking line WEINGARTEN | Senica

  MATERIAL SURFACE	dry/ oiled
  KIND OF MATERIAL	Hot rolled-pickled/ cold rolled / zinc coated
  TYPE OF MATERIAL	Oceľ	Hliník
  THICKNESS(mm)	0,5 ‑ 3,0	0,5 ‑ 3,0
  WIDTH (mm)	200 ‑ 1450
  TENSILE STRENGHT ‑ Rm (Mpa)	0,5 ‑ 1,0 mm 290 ‑ 700	1,0 ‑ 3,0 mm 290 ‑ 500
  YIELD POINT ‑ Re (Mpa)	180 ‑ 700
  INSIDE Ø DIAMETER (mm)	508 + 610
  OUTSIDE Ø DIAMETER(mm)	max 1850
  WEIGHT OF COIL(t)	5
  MIN. LENGHT OF FEED (mm)	175
  FORCE (kN)	500
  SLIDE STROKE ‑ FIXED (mm)	350
  DISTANCE RAM-TABLE (mm)	1250
  SLIDE ADJUSTMENT (mm)	350
  TABLE SURFACE(mm)	2440 x 1525
  NO. OF STROKES (s.P.M.)	15 ‑ 35
  DISTANCE BETWEEN UPRIGHTS (width x height) (mm)	840 x 1600
  BLANK PARAMETERS
  BLANK SIZE MAX (mm)	1500 x 1650
  BLANK SIZE MIN (mm)	245 x 175
  MAX. HEIGHTS OF STACK EXCL PALLET (mm)	500
  MAX. HEIGHTS OF STACK INCL PALLET(mm)	610
  MAX. WEIGHT OF STACK INCL PALLET (t)	5

  LENGTH OF TOLERANCE - STRAIGHT / RACTANGULAR CUT

  	Feed (mm)
  THICKNESS (mm)	< 400	> 400
  < 1,5	+/- 0,25	+/- 1,0
  > 1,5	+/- 0,5	+/- 1,0

  Lenght of tolerance / trapezoidal cut

  	Feed (mm)
  THICKNESS (mm)	< 400	> 400
  < 1,5	+/- 0,25	+/- 1,0
  > 1,5	+/- 0,5	+/- 1,0

  Lenght of tolerance - straight cut

  

  Shaped cutting by tools

  CAN BE PRODUCED WITH THE TOOLS SUPPLIED BY CUSTOMERS OR MADE BY AMG.
  MAX. DIMENSION TOOLS (w x l x h ) (mm)	2440 x 1525 x 1350
  MIN HEIGHT TOOLS (mm)	1050
  MIN. / MAX. WORKING SPEED (spm)	15 ‑ 35
  STRIP THICKNESS (mm)	0,5 ‑ 3,0
  MAX. BLANK SIZE (mm)	1500 x 2000
  MIN. BLANK SIZE (mm)	245 x 175

  

  Possibility to consult other parameters individually.

• Longitudinal slitting line STAM – L4

  Collapse
  Výrobky: Sheets and cuts

  MATERIAL SURFACE	dry / oiled
  KIND OF MATERIAL	Hot rolled ‑ pickled /cold rolled/ metallized
  TYPE OF MATERIAL	Steel		Alluminium
  	THICKNESS (mm)	INPUT ‑ COIL		OUTPUT ‑ STRIPS
  		Min.	Max.	Min.	Max.
  THICKNESS (mm)		0,7	6,0	0,7	6,0
  WIDTH (mm)		400	1880	35	1880
  TENSILE STRENGTH ‑ Rm (MPa)	0,8 ‑ 2,0		1400
  	2,0 ‑ 3,0		1200
  	3,0 ‑ 6,0		1000
  YIELD POINT ‑ Re (MPa)	0,8 ‑ 2,0		1100
  	2,0 ‑ 3,0		900
  	3,0 ‑ 6,0		700
  OUTSIDE DIAMETER (mm)		900	2000	900	2000
  INSIDE DIAMETER (mm)		508 + 610		508 + 610
  WEIGHT OF COIL (t)			29		21
  WEIGHT OF STRIP (T)					7,5*

  * Maximum weight of strip, package trhough packaging line BIELE.

  Edge trim needed for slitting on L4/ for alluminium - 3 times the thickness of the material per side/

  THICKNESS (mm)	WIDTH OF STRIPS (mm)	TRIM STEEL TOTAL (mm)	TRIM OF ALLUMINIUM TOTAL (mm)
  0,8 ‑ 2,0	35 ‑ 1850	10	20
  2,1 ‑ 3,0	35 ‑ 1850	12	20
  3,1 ‑ 4,0	35 ‑ 1850	16	24
  4,1 ‑ 5,0	35 ‑ 1850	20	30
  5,1 ‑ 6,0	35 ‑ 1850	24	30

  Number of strips according to quality of material

  	STRENGTH LIMIT ‑ RM (mm)
  THICKNESS (mm)	470	750	900	1000	1200	1400
  0,8 ‑ 0,9	32	23	21	20	17	15
  0,91 ‑ 1,0	29	21	19	18	15	13
  1,1 ‑ 2,0	18	13	12	11	9	8
  2,1 ‑ 2,5	15	11	10	9	7
  2,6 ‑ 3,0	13	9	8	8	6
  3,1 ‑ 3,5	12	9	8	7
  3,6 ‑ 4,0	11	8	7	6
  4,1 ‑ 5,0	9	6	6	5
  5,1 ‑ 6,0	7	5	5	5

  Width tolerance according to line parameters

  THICKNESS	WIDTH OF STRIP (mm)
  	35	125	+/- 0,1
  0,8 -1, 5	125	250	+/- 0,2
  	250	500	+/- 0,25
  	over 500		+/- 0,3
  	35	125	+/- 0,15
  1,51 ‑ 4,0	125	250	+/- 0,25
  	250	500	+/- 0,3
  	over 500		+/- 0,3
  	35	125	+/- 0,2
  4,01 ‑ 6,0	125	250	+/- 0,25
  	250	500	+/- 0,5
  	over 500		+/-0,5

  Possibility to consult other parameters individually.

  

• Press blanking line – L5 FAGOR

  Collapse
  Výrobky: Trapezoidal blanks

  MATERIAL SURFACE	dry / oiled
  KIND OF MATERIAL	Hot rolled ‑ pickled / cold rolled / zinc coated
  TYPE OF MATERIAL	Steel	Alluminium
  THICKNESS (mm)	0,5 ‑ 3,5	0,5 ‑ 4,0
  WIDTH (mm)	200 ‑ 2100
  YIELD POINTS ‑ Re (Mpa)	900	450
  INSIDE DIAMETER (mm)	508 + 610
  OUTSIDE DIAMETER (mm)	900 ‑ 2100
  COIL WEIGHT MAX.(t)	29
  FEEDING LENGHT MIN. (mm)	200
  FORCE (kN)	8000
  SLIDE STROKE ‑ FIXED (mm)	180
  DISTANCE RAM ‑ DISTANCE (mm)	1200
  SLIDE ADJUSTMENT (mm)	400
  TABLE SURFACE(WIDTH x DEPTH) (mm)	4500 x 3000
  NO. OF STROKES (s.P.M.)	10 ‑ 90
  DISTANCE BETWEEN UPRIGHTS (mm)	4650 ‑ 2525
  BLANKS PARAMETERS
  MAX. BLANKS SIZE (mm)	2100 x 4000
  MIN. BLANK SIZE (mm)	200 x 200
  MAX. HEIGHT OF STACK EXCL PALLET (mm)	600
  MAX. HEIGHT OF STACK INCL PALLET(mm)	9
  MAX. WEIGHT OF STACK INCL PALLET (t)	15

  Lenght of tolerance - straight / rectangular cut

  	Feed (mm)
  THICKNESS(mm)	< 400	> 400
  < 1,5	+/- 0,25	+/- 1,0
  > 1,5	+/- 0,5	+/- 1,0

  Lenght of tolerance - trapezoidal cut

  	Feed (mm)
  THICKNESS (mm)	< 400	> 400
  < 1,5	+/- 0,20	+/- 0,5
  > 1,5	+/- 0,5	+/- 1,0

  Lenght of tolerance - straight cut

  

  Shaped cutting by tools

  MIN / MAX. WORKING SPEED (cycles/min)	15/90
  STRIP (STEEL) THICKNESS (mm)	0,5 ‑ 3,0
  STRIP (ALUMMINIUM) THICKNESS (mm)	0,5 ‑ 2,5
  MAX. BLANK SIZE (mm)	2100 x 4000
  MIN. BLANK SIZE (mm)	200 x 200

  

• Press blanking line – L6 FAGOR

  Collapse
  Výrobky: Cuts and trapezoidal sheets

  MATERIAL SURFACE	dry / oiled
  KIND OF MATERIAL	Pickled steel, cold rolled, zinc coated (electrolytic, hot galvanized, phosphate), oiled, no-oiled, USIBOR for inner parts of hot stamping, and eventually outer blanks.
  TYPE OF MATERIAL	Steel / USIBOR
  THICKNESS(mm)	0,5 ‑ 3,5
  WIDTH (mm)	200 ‑ 2000
  YIELD POINT ‑ Re (Mpa)	< 2 mm 1100 >2 mm 600
  INSIDE DIAMETER (mm)	508 + 610
  OUTSIDE DIAMTER (mm)	900 ‑ 2000
  MAX. WEIGHT OF COIL (t)	29
  MIN. LENGHT OF FEEDING (mm)	50
  FORCE (kN)	12500
  SLIDE STROKE ‑ FIXED (mm)	200
  DISTANCE RAM ‑ TABLE (mm)	1460
  SLIDE ADJUSTMENT (mm)	450
  TABLE SURFACE (WIDTH x DEPTH) (mm)	4500 x 2500
  POČET ÚDEROV (s.P.M.)	10 ‑ 66
  DISTANCE BETWEEN UPRIGHTS (WIDTH x HEIGHT) (mm)	4640 ‑ 2600
  BLANKS PARAMETERS
  MAX. BLANKS SIZE(mm)	2200 x 1200
  MIN. BLANKS SIZE (mm)	300 x 80
  MAX. HEIGHT OF STACK EXCL. PALLET (mm)	500
  MAX. HEIGHT OF STACK INCL. PALLET (mm)	860
  MAX. HEIGHT OF STACK INCL. PALLET (t)	8
  MIN/MAX WORKING SPEED (cycle/min)	10 ‑ 66
  MAX. BLANK SIZE (mm)	2200 x 1200
  MIN. BLANK SIZE (mm)	200 x 200

  

  Length of tolerance - straight/rectangular cut

  	Feed (mm)
  THICKNESS (mm)	< 400	> 400
  < 1,5	+/- 0,25	+/- 1,0
  > 1,5	+/- 0,5	+/- 1,0

  Length of tolerance - trapezoidal cut

  	Feed (mm)
  THICKNESS (mm)	< 400	> 400
  < 1,5	+/- 0,2	+/- 0,5
  > 1,5	+/- 0,5	+/- 1,0

  Length of tolerance - straight cut

  

  Shaped cutting by tools

  Can by produced with the tools supplied by customers or made by AMG.

• Press blanking line – L7 FAGOR

  Collapse
  Výrobky: Sheets and cuts

  L7 press blanking line Fagor | Senica

  MATERIAL SURFACE	dry / oiled
  KIND OF MATERIAL	Pickled steel, cold rolled, zinc coated (electrolytic, hot galvanized, phosphate), oiled, no-oiled, USIBOR for inner parts of hot stamping, and eventually outer blanks
  TYPE OF MATERIAL	Steel / USIBOR
  WIDTH (mm)	200 ‑ 2000
  THICKNESS (mm)	0,5 ‑ 3,5
  YIELD POINT ‑ RE (Mpa)	<2 mm 1100 N/m² >2 mm 600 N/m²
  INSIDE DIAMETER (mm)	508 ‑ 610
  OUTSIDE DIAMETER (mm)	900 ‑ 2000
  COIL WEIGHT MAX (t)	29
  MIN. LENGHT OF FEEDING (mm)	50
  FORCE (kN)	12500
  SLIDE STROKE ‑ FIXED (mm)	200
  DISTANCE RAM ‑ TABLE (mm)	1460
  SLIDE ADJUSTMENT (mm)	450
  TABLE SURFACE (width x depth)	4500 x 2500
  NO. OF STROKES (s.P.M.)	10 ‑ 66
  DISTANCE BETWEEN UPRIGHTS (width x height) (mm) (mm)	4640 – 2600

  Rozmery nástrihov

  MAX. BLANK SIZE (mm)	2200 x 1200
  MIN. BLANK SIZE (mm)	300 x 80
  MAX. HEIGHT OF STACK EXCL. PALLET (mm)	500
  MAX. HEIGHT OF STACK INCL. PALLET (mm)	860
  MAX. WEIGHT OF STACK INCL. PALLET (t)	8
  MIN./MAX. WORKING SPEED (cycles / min)	10 ‑ 66
  MAX. BLANK SIZE (mm)	2200 x 1200
  MIN. BLANK SIZE (mm)	200 x 200

  

  Length of tolerance – straight / rectangular cut

  	Feed (mm)
  THICKNESS	< 400	> 400
  < 1.5	+/- 0.25	+/- 0.5
  > 1.5	+/- 0.5	+/- 1.0

  Length of tolerance – trapezoidal cut

  	Feed (mm)
  THICKNESS	< 400	> 400
  < 1.5	+/- 0.2	+/- 0.5
  < 1.5	+/- 0.5	+/- 1.0

  Length of tolerance – straight cut

  MAX. ANGLE

  40°

  

  Shaped cutting by tools - Can be produced with the tools supplied by customers or made by AMG.

  Individuálne možnosť konzultácie iných parametrov.

  

  

  

  

• L1 press blanking line FAGOR (Nitra)

  Collapse
  Výrobky: Sheets

  L1 press blanking line FAGOR | Nitra

  MATERIAL SURFACE	dry / oiled
  KIND OF MATERIAL	Hot rolled ‑ pickled / Cold rolled ‑ zinc coated, electrolytic, galvanized, phosphate
  TYPE OF MATERIAL	Steel	Aluminum
  THICKNESS	0,5 ‑ 3,5	0,5 ‑ 4,0
  TENSILE STRENGTH ‑ RM (Mpa)	< 2 mm 1145 N/m² > 2 mm 1000 N/m²	400 N/m²
  YIELD POINT ‑ RE (Mpa)	< 2 mm 1000N/m² > 2 mm 600 N/m²	350 N/m²
  INSIDE DIAMETER (mm)	508 ‑ 610
  OUTSIDE DIAMETER (mm)	800 ‑ 2500
  COIL WEIGHT MAX (t)	35
  FEEDING LENGTH MIN (mm)	150
  FORCE (kN)	8000
  SLIDE STROKE ‑ FIXED (mm)	200
  DISTANCE RAM ‑ TABLE (mm)	1250
  SLIDE ADJUSTMENT (mm)	350450
  TABLE SURFACE (width x depth)	5400 x 2500
  NO. OF STROKES (s.P.M.)	15 ‑ 66

  Rozmery nástrihov

  MAX BLANK SIZE (mm)	2150 x 4500
  MIN BLANK SIZE (mm)	150 x 200
  MAX. HEIGHT OF STACK EXCL. PALLET (mm)	500
  MAX. HEIGHT OF STACK INCL. PALLET (mm)	860
  MAX. WEIGHT OF STACK INCL. PALLET (t)	8
  TOLERANCE	EN 10131/10143/10051
  MAX. ANGLE	35°
  MAX. DIMENSION TOOLS (W x L x H)	5400 x 2500 x 1150
  MAX. WEIGHT TOOLS (t)	36
  MAX. WEIGHT OF UPPER PAET TOOLS (t)	25